Product center
Your Location:Home > PRODUCTS>Plastic and Rubber Testing Equipments
XHS-GT-V1/V3 Gas Permeability Tester
Product Category:Plastic and Rubber Testing Equipments
XHS-GT-V1/V3 Gas Permeability Tester is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, composite films, high barrier materials, sheeting and aluminum foils.
ISO 15105-1, ISO 2556, GB/T 1038-2000, ASTM D1434, JIS K7126-1, YBB 00082003
Prepare baseline correction function, measure system error, ensure test accuracy;
Standard film correction function, sensor external calibration function;
Real-time monitoring of the test state, the whole process of saving the test state, the realization of all the test data curve can be reproduced, easy to evaluate the test process;
The test curves of each chamber can be displayed individually or in groups, which is convenient for comparison test. Test curve with full screen display, local observation, variable ratio display and other capabilities.
Power failure data saving function, data sampling rate is adjustable, automatic repeated test function;
Open database system for data analysis
The gas permeability, solubility coefficient and diffusion coefficient of the sample can be measured simultaneously
The three test chambers are completely independent and can test three same or different samples at the same time
Wide range, high precision temperature and humidity control, meet the test under various test conditions
It provides both proportional mode and standard mode test process judgment modes
The test range can be expanded according to needs to meet the requirements of high transmittance test
Data fitting can be carried out at any temperature, and the test results under extreme conditions can be easily obtained
Support toxic gas and flammable and explosive gas testing (customization needed)
The system is controlled by computer and the whole test process is completed automatically
Provide standard film for rapid calibration to ensure the accuracy and versatility of test data
Equipped with RS232 universal data interface (V3), convenient data transmission.
Model | XHS-GT-V1 | XHS-GT-V3 |
Control Mode | 10 Inch Touch Screen | PC |
Test Range | 0.01~50,000 cm3/m2·24h·0.1MPa (standard volume) | |
Number of Specimens | 1 | 3 (with independent test results) |
Main Sensor Quantity | 1 | 3 |
Vacuum Resolution | 0.01 Pa | |
Vacuum Degree of Test Chamber | <20 Pa | |
Temperature | 5°C ~ 65°C (5C -95C is optional) | |
Temperature Control Accuracy | ±0.05C (standard) | |
Temperature Resolution | 0.01C | |
Humidity | 0%RH, 5%RH-95%RH | |
Accuracy | ±1%RH | |
Specimen Size | Φ97 mm | |
Test Area | 38.48 cm2 | |
Test Gas | O2, N2 and CO2 (outside of supply scope) | |
Test Pressure | -0.1 MPa - +0.15 MPa | |
Vacuum tube diameter | 1/4" | |
Calibration mode | Calibration of standard film and external calibration of vacuum sensor | |
Sample thickness | ≤3mm | |
Gas Supply Pressure | 0.4 MPa ~ 0.6 MPa | |
Port Size | Φ6 mm PU Tubing | |
Instrument Dimension | 765 mm (L) x 440 mm (W) x 470mm (H) | |
Weight | 60Kgs | 88Kgs |
Power Supply | 220VAC 50Hz / 120VAC 60Hz | |
Standard Configuration | Instrument, Constant Temperature Control Device, Professional Software (V3), Computer (V3), Round Sample Cutter, Vacuum Grease, and Vacuum Pump | |
Optional | Optional: sampling blade, vacuum grease, vacuum pump oil, fast quantitative filter paper, humidity generator | |
Note: The air source of the machine is ф 6mm polyurethane pipe; gas source and distilled water are provided by users |
XHS-47 Methylene Chloride Tester
XHS-15B Vicat Softening Temperature and HDT Machine
XHS-38 Accelerated Aging Oven
XHS-50 Polarized Stress Tester
XHS-19 SPI Vinyl Plastic Film Flammability Tester
XHS-17 Falling Dart Impact Tester
XHS-43 Film Free Shrink Tester
XHS-15A Vicat Softening Temperature and HDT Machine
XHS-OTR Oxygen Transmission Rate Test System
XHS-40 Smoke Desity Tester
XHS-11 Lasting Adhesion Tester
XHS-WVTR Water Vapor Transmission Rate Test System
XHS-18 Salt Spray Chamber
XHV-01C Elmendorf Tearing Strength Tester
XHS-05T Thermal Gravimetric Analyzer
XHV-01B Elmendorf Tearing Strength Tester
XHS-05 Differential Scanning Calorimeter
XHS-04B Haze Meter
XHS-01 Charpy and Izod Impact Testing Machine
XHS-WVTR-C6 Water Vapor Permeability Rate Tester
XHS-35 Ross Flexing Tester
XHS-09 Falling Weight Impact Tester
XHS-08 Coefficient of Friction Tester
XHS-49 Benchtop Thickness Tester
XHS-10 Primary Adhesive Tester
XHS-02A Pneumatic Sample Press
XHS-37B Rubber Testing Rheometer With Rotorless Curemeter
XHS-05Q Carbon Black Content Tester
XHS-39D Lab Twin Screw Extruder
XHS-04C Haze Meter
XHS-20 Plastic Bars Bending Tester
XHS-13 Fogging Tester
XHS-14 Heat Seal Tester
XHS-45 Pipe Hydrostatic Pressure Testing Machine
XHS-12 Laboratory Dry Oven
XHS-36 Low Temperature Brittleness Tester
XHS-06 Digital Vacuum Leak Tester
XHS-21 Friction / Peel Tester
XHS-03 Melt Flow Indexer
XHS-16 Bottle Cap Torque Tester
XHS-39A Lab Injection Molding Machine
XHS-07 Oxygen Index Tester
XHS-55 Capillary Rheometer
XHS-42 Automatic Densimeter
XHS-05S Carbon Black Dispersion Tester
XHS-56 Wallace Rapid Plastimeter
XHS-37A Mooney Viscometer
XHS-04A Haze Meter