+ 86-531-67880131Product center
Hot Line
+86-531-67880131Your Location：Home > PRODUCTS>Paper and Packaging Testing Equipment>Packaging Tester
XHV-07B Double Wing Drop Impact Tester
Product Category：Packaging Tester
XHV-07B drop tester is mainly used for assessment package in the actual transportation, loading and unloading process by dropping impact in the influence degree, evaluate packing in handling impact resistance strength and the rationality of the design of packaging.
ISO 2248, JIS Z0202-87, ASTM D5276, ISTA
Drop tester is mainly used for performing drop test for big carton, it can do various test according to the test subjects requirements (surface, edges, Angle test) after place specimen in balance status. During the test, the rack move down in high speed and leave from specimen, because of high speed shock absorber, the rack is embedded in the base plate.
Mass of Specimen | 0-80Kgs |
Max Dimension of Specimen | 1000 x 1000 x 1500mm |
Testing Height | 350-1500mm (adjustable) |
Dimension of Each Wing | 700mmx280mm |
Dimension of Impact Panel | 1600 x 1800mm |
Parallel error of impact panel | <1° |
Accuracy of Test Height | ±10mm |
Test method | Surface test, Edge test, Angle test |
Drop | Electric |
Lifting | Electric |
Error in the angle between the falling surface of the specimen and the horizontal during the falling process | <1° |
Protection | Motor fault protection, High and low limit protection, Emergency stop |
Dimension | 1600 x 1800 x 2200 mm |
Power Supply | 220V, 50Hz, 2000W |
Weight | About 300Kgs |
Hot line:
